Fail-over and Load Balance
Failover Only: This is the default configuration. If there are multiple WANinterfaces configured, the WAN interface with higher link weight takes higher priority and functions as the primary interface. In case of primary interface failure, the secondary interface takes over. This is called the failover mode of operation. In this mode, port forwarding to internal servers will not be automatically switched to the working interface.
Load Balance / Failover: In this configuration, if there are multiple links configured, network traffic is distributed among the configured links. The traffic distribution on each link depends on the respective link weight configured. This configuration can be enabled if the web server is configured in the LAN/DMZ zone and multiple ISPs are configured in the network. In case of a link failure, traffic is distributed among the other links. However, in this configuration, routing policies can be defined to route specific connection requests through the other configured links.
- Login to the Tacitine. (If you are configuring the Tacitine for the first time, the default Lan IP is http://192.168.100.1) and default username : admin & Password : admin99
- Click the Configuration > Routing /Load Balancing
3. Method : Failover & Load Balance / Failover Default: Failover
4. Scan Interval (seconds) Frequency at which the status of the interface is monitored. Default: 60
5.Apply the Setting