Overview

When configuring a Site-to-Site VPN tunnel in EN6200 Enhanced firmware using Main Mode both the Tacitine appliances and Other firewall (Site A and Site B) must have a routable Static WAN IP address.

Add Your Heading Text Here

Step 1 : Navigate Configuration > Vpn > IPSEC > Add

Step 2 : Mention the Ipsec Mode as main 

Step 3 : Mention the local ip want to make route to branch as same in the Remote side

Step 4 : Disable the Nat Traversal  and select the Local wan connection asa the Static Ip and mention the Wan ip and Gateway Local id is the optional

Step 5 : As same the Remote side wan ip provide in the Text box and Gateway detection in remote wan ip option there is make as auto detect / mention the gateway

 Step 6 : Generate the Pre share key and provide to the branch side configuration both same same 

 Step 7 : IKE mode make it as the main and Key Exchange mode as Auto and create the Phase 1 and Phase 2 configure  as same for both branch and head office and Enable the Dead Per detection enable any one side is sufficient 

Close Menu