Procedure

Step 1 : Navigate Configuration > VPN > SSL-VPN Server > Add > enable the services Provide the descriptions

Step 2 : mention the interface name for eg : VST1

Step 3 : select the protol where the VPN access via UDP /TCP  and provide the port number For Eg  default port number 1194 

Step 4 :  Provide the server ip and subnet mask and dynamic start ip and end ip 
Note : it should be different from you local ip given like 40.40.40.1 or 60.60.60.1

Step 5 : select the Cipher Type default use : AES-128-CBC

Step 6 : select the Authentication algorithm Default :SHA1

Step 7 : mention the MTU value Default value : 1500 

Step 8 : Select tunnel Type default value : split type ( it only send the vpn traffic to Firewall )  Full tunnel ( all traffic send it through to Firewall )

Step 9 : enter all certificate details  like email, country etc and organization name 

Step 10 : navigate Save > Restart Services 

Step 11 : Select the Create the Sever  and Click the Router > Add Route

Step 12 : Mention the Description and Destination ip (Network ip and subnet mask ) Note: this Lan ip address of the firewall  to access through VPN Client

Step 13 : Select the Push this rout to the client 

Step 14: Select the Create the Sever  and Click the Clients > Add client 

Step 15 : Mention the Description and  ip Address type : Default and select DHCP Profile and tunnel Type make it as server Default 

Step 16 : Mention the Certificate details like location ,email id  and Save 

Step 17 : Select the Create the Client and Click the Router > Add Route

Step 18 : Mention the Description and Destination ip (Network ip and subnet mask ) Note: this Lan ip address of the Branch  firewall  to access through VPN Client

Step 19 : Select the Route Type subnet behind Client and Select Add server routing table 

Close Menu